PENLEY PLATINUM FAIRWAY WOOD SHAFT
|PENLEY Pt2 FAIRWAY WOOD SHAFT SPECS|
|FLEX||WEIGHT||LENGTH||TIP DIA.||BUTT DIA.||TORQUE||TBAR*|
Kick (Bend) Point: Mid
Ball Flight: Mid
WHO SHOULD PURCHASE THE PENLEY FAIRWAY WOOD?
A player that is looking for Tour Quality, stand-alone fairway to replace their 3, 5 or 7 wood. The Platinum Fairway woods are designed as a ‘true’ fairways- not a driver cut down to a fairway. Each model is a unique design of its own with different mechanical and physical properties beyond a cut down driver.
NOT SURE WHICH PENLEY SHAFT IS FOR YOU?
Suggested Flex Selection by Swing Speed:
R – Generally 80-95 mph. – slower tempo
S – Generally 96-105 mph. – mid tempo
X – Generally 106-115 mph. – fast tempo
Penley suggest that you consult a Professional Club fitter.
Still have questions? Contact Us– We will be happy to help answer any questions you may have.
MADE IN THE USA
Our shafts are designed, manufactured and built right here in San Diego, California. Carter Penley designs and oversees all manufacturing of Penley Shafts. You can be assured that each shaft designed by Carter Penley will always be the best, most consistent quality shaft you will ever purchase.
TBAR (Tip to Butt Aspect Ratio)
By analysis Penley determined that 60% of most golfers fall within flex range ‘1’ of the each and separate specific golf shaft flex ranges. ‘1’ is the center (1/3) of the full flex range (yellow dotted lines, 3-7). Penley tolerances are typically held to ~30%-40% of industry standards.
The shaft industries standard flex range is dynamically much larger and in many cases overlaps corresponding flexes. This is why some players who may need to build a backup club, or a replacement shaft for their club ends up finding out that the backup or or replacement shaft doesn’t feel or play the same as the first shaft model.
All Penley shafts are designed primarily to meet the 1 (mid-range) of each shaft flex. This ‘1’ range is denoted as A1, R1, S1, X1, 2X1 & 3X1 – etc and fit approximately ~60% of players.
Flex range and Zone flexes are determined by Penley’s TBAR™ (Tip to Butt Aspect Ratio) algorithm and are somewhat infinite vs. the long time excepted flex terminology.
To quantify Zone Flex Characterization, Penley has selected eight specific zone flexes outside of a predetermined flex range denoted numerically as ‘1’ (Penley’s Std. Range ‘1’) of each defined flex range i.e. ‘L1’, ‘A1’, ‘R1’, ‘S1’ and ‘X1’ and so on.
All shafts are designed primarily to meet the Z1 (mid-range).
Price: $150.00 ea.