ET3LD Long Drive X

$299.00

The ET3LD begins a new era where the ET2LD left off.

ET3 LD DESIGN DRIVERS

Fully advancing and applying the TBAR algorithm for the Long Drive shaft design. The ET3LD shaft has been upgraded and improved as well as upgrading the material used, plus geometry changes resulting in a tighter, more accurate shot placement. As well as:

  • Smoother load transition throughout the neutral axis, yielding a tighter dispersion – means more competition fairway accuracy
  • Maximum Load Transition to improve distance, accuracy and performance
  • Accommodates lower head lofts generally used in Long Drive events.
  • The tightest, most accurate manufacturing tolerances of any golf shaft manufacturer in the industry.

Although not technical in application, the ET3LD shaft gets a cosmetic upgrade: the ET3LD is gloss black and decorated with a brilliant white pearlescent sleeve unique to the Long Drive model.

 

HANDCRAFTED WITH PRECISION

All ET3LD shafts are rolled and ground with handcrafted precision practiced by no other known manufacturer. Mr. Penley himself oversees the manufacturing and quality control of each and every Long Drive shaft.

SMALL LOT NUMBERED PRODUCTIONS

The ET3LD shafts are produced in small lots of 20 or less per flex range and are individually numbered per each lot produced.

 

In stock (can be backordered)

SKU: ET3LDW06-1X Category:

Description

PENLEY ET3LD LONG DRIVE SHAFT

 

SHAFT SPECS
ET3LD LONG DRIVE
FLEX WEIGHT
LENGTH
TIP DIA. BUTT DIA.
TORQUE
TBAR*
(+/- 5g) (+/- .5 in) (+/- .005 in) (+/- .005 in)
X 72g 49″ 0.335″ 0.590″ 3.4° 9.5/6.1
XX 75g 49″ 0.335″ 0.590″ 3.2° 10.1/7.2
XXX 78g 49″ 0.335″ 0.595″ 3.0° 10.8/7.7

 

Kick (Bend Point): See TBAR*

Ball Flight (Trajectory): Mid/High

* The TBAR (Tip to Butt Aspect Ratio) Algorithm is the determining flex factor, although we do apply common flex range description to help players determine which golf shaft is best suited for their level of play.

All Penley shafts are designed primarily to meet the 1 (mid-range) of each shaft flex and fits approximately ~60% of players.

NOTE: Carter Penley developed specific Zone Flexes for the professional level player (PGA, LPGA, Long Drive and aspiring amateurs) and denotes those flexes as ‘Zone Flex Characterizations’.
Players of this level may want to contact the factory to determine if the production mid-range TBAR shaft is suitable for their specific swing.

For those that need a a different, more specific tuned shaft for their needs (such as higher/lower launch), review the Zone Flex Characterization Chart or Contact Penley directly.

 

WHO SHOULD PURCHASE THE ET3LD LONG DRIVE SHAFT?

The ET3LD shaft is ideal for:

  • Strong, powerful hitters that require extreme distance and control – particularly Professional Long Drive competitors as well as aspiring Long Drive Competitors.
  • Those looking for a shaft to accommodate lower head lofts typically used in Long Drive Competitions
  • Competition fairway accuracy – tighter dispersion means more shots staying within the Grid – a must for all Long Drive Competitors

 

NOT SURE WHICH PENLEY SHAFT IS FOR YOU?
SWING SPEED

Suggested Flex Selection by Swing Speed:

X – Generally 115-135+ mph. STRONG, AGGRESSIVE tempo

2X – Generally 135-145+ mph. EXTREME tempo

3X – Generally 150+ mph. EXTREME tempo

NOTE: Swing speed average may vary based on individual swing tempo and timing.

 

Note: Carter Penley developed specific Zone Flexes for the professional level player (PGA, LPGA, Long Drive and aspiring amateurs) and denotes those flexes as ‘Zone Flex Characterizations’.
Players of this level may want to contact the factory to determine if the production mid-range TBAR shaft is suitable for their specific swing.

For those that need a a different, more specific tuned shaft for their needs (such as higher/lower launch), review the Zone Flex Characterization Chart or Contact Penley directly.

NOTE: Due to the extreme use, All ET3LD Long Drive Shafts are precision built on custom engineering orders only and built in small lots of 20 or less at a time.

Still have questions? Contact Us– We will be happy to help answer any questions you may have.

 

MADE IN THE USA

Made In The USA

Our shafts are designed, manufactured and built right here in San Diego, California. Carter Penley designs and oversees all manufacturing of Penley Shafts. You can be assured that each shaft designed by Carter Penley will always be the best, most consistent quality shaft you will ever purchase.

 

 

Additional information

Dimensions 50 × 2 × 2 in