CUSTOM BUILT ET2 DRIVER BY PENLEY
ET2 Driver Specifications
|Penley ET2 (for specs, click here)|
|46″ (trimming options available)|
|Aftermarket Head (similar to Taylormade Burner)|
|9.5° or 10.5°|
SHAFT FLEX: Available in R1, S1 and X1 (All flexes with ‘1’ are mid butt flex range with mid tip flex range and cover 60% to 70% of players)
ZONE FLEX CHARACTERIZATION: (covers 15% – 20% of players who require specific and/or fine tuning of the club performance)
Players options are:
- Z1 (mid butt flex with stiff tip)
- Z2 (mid butt flex with soft tip)
- Z3 (mid tip flex with stiff butt)
- Z4 (mid tip flex with soft butt)
For more about Zone Flex Characterization, review the Zone Flex Characterization Chart or Contact Penley.
GRIP: Penley Pure Grip
RETURNS: IF THE CLUB DOES NOT GIVE YOU MORE DISTANCE OR ACCURACY OR CONSISTENCY SEND IT BACK WITH YOUR INPUT AND PENLEY WILL RE-TUNE* AND OR REPLACE** THE COMPLETE GOLF SHAFT.
*Offer is limited to one re-tune or one replacement.
**Item must be returned in the same condition that it was received.
MADE IN THE USA
Our shafts are designed, manufactured and built right here in San Diego, California. Carter Penley designs and oversees all manufacturing of Penley Shafts. You can be assured that each shaft designed by Carter Penley will always be the best, most consistent quality shaft you will ever purchase.